Take a look at Dosmatic's diesel information and look for us at the Pacific Oil Conference.
http://myemail.constantcontact.com/Exciting-news-from-Dosmatic-especially-for-POC-attendees-.html?soid=1102437387223&aid=HLHPYmY9OcU
Wednesday, September 15, 2010
http://myemail.constantcontact.com/Exciting-news-from-Dosmatic-especially-for-POC-attendees-.html?soid=1102437387223&aid=HLHPYmY9OcU
Take a look at Dosmatic's diesel information and look for us at the Pacific Oil Conference.
http://myemail.constantcontact.com/Exciting-news-from-Dosmatic-especially-for-POC-attendees-.html?soid=1102437387223&aid=HLHPYmY9OcU
http://myemail.constantcontact.com/Exciting-news-from-Dosmatic-especially-for-POC-attendees-.html?soid=1102437387223&aid=HLHPYmY9OcU
Friday, July 2, 2010
Dosmatic USA Introduces New SuperDos® and MixPro® Injectors for Wettable and Soluble powder at the OFA Short Course
Carrollton, Texas – July, 2010 – Dosmatic USA Introduces the New SuperDos (WSP) 2.5% and MixPro (WSP) (2%) for wettable and soluble powder. The new series offers same superior dosing and chemical compatibility as Dosmatics’s liquid concentrate injectors.
The SuperDos (WSP) 2.5% is available in flow range models; 15, 20 and 30 gpm (57, 76 and 114 l/mn) and is offered on the MixPro 2% (WSP). A Wettable and Soluble Powder Lower End (WSPLE) conversion kit can be ordered for both models to convert an existing liquid concentrate injector for wettable or soluble powder dispensing. All (WSP) models and (WSPLE) kits can inject solution mixtures from either liquid concentrate, wettable or soluble powder.
“Our proven dosage piston technology remains the lower end of choice for extended wear life when injecting 100% liquid additives. However, a number of our customers are using wettable and soluble powder products for their injection applications,” explained Sam Chandler, Dosmatic’s senior vice president of sales. “Our (WSP) models and (WSPLE) kits take advantage of a unique dosage gasket designed to withstand the abrasiveness of suspended particles associated with wettable and soluble powder.”
The SuperDos and MixPro (WSP) series and (WSPLE) conversion kits are now shipping. Dosmatic is currently developing WSP technology for more models and ratios and will soon be available. For more information please contact Dosmatic Customer Service/USA at 800-344-6767, or visit http://www.dosmatic.com/.
The SuperDos (WSP) 2.5% is available in flow range models; 15, 20 and 30 gpm (57, 76 and 114 l/mn) and is offered on the MixPro 2% (WSP). A Wettable and Soluble Powder Lower End (WSPLE) conversion kit can be ordered for both models to convert an existing liquid concentrate injector for wettable or soluble powder dispensing. All (WSP) models and (WSPLE) kits can inject solution mixtures from either liquid concentrate, wettable or soluble powder.
“Our proven dosage piston technology remains the lower end of choice for extended wear life when injecting 100% liquid additives. However, a number of our customers are using wettable and soluble powder products for their injection applications,” explained Sam Chandler, Dosmatic’s senior vice president of sales. “Our (WSP) models and (WSPLE) kits take advantage of a unique dosage gasket designed to withstand the abrasiveness of suspended particles associated with wettable and soluble powder.”
The SuperDos and MixPro (WSP) series and (WSPLE) conversion kits are now shipping. Dosmatic is currently developing WSP technology for more models and ratios and will soon be available. For more information please contact Dosmatic Customer Service/USA at 800-344-6767, or visit http://www.dosmatic.com/.
Tuesday, March 23, 2010
New Product Labeling on Dosmatic MiniDos® Injector Series Streamlines Selection
March 15, 2010 – Dosmatic U.S.A. / International, Inc., the technology leader in non-electric, fluid-driven, proportional injectors and dispensing pumps, today reintroduced its versatile MiniDos line of compact, low -to mid-flow injectors with improved on-product labels. The new labels, like those on Dosmatic’s other injector lines, make it easy for users to quickly and confidently select the injector most appropriate for their particular application, flow rate and desired injection ratio. Now shipping with the new descriptive labels are the MiniDos 7 gpm (4%-20% injector range), the MiniDos 10 gpm, (2%-10% injector range), and the MiniDos 12 gpm series of four models, which accommodates injection ratios of up to 0.4%, 1%, 2.5% and 5%.
“The new labeling system allows our customers to more readily identify the correct injector for their needs,” explained Dosmatic Senior Vice President Sam Chandler. “This enhancement reflects our commitment to continuous improvement and to listening to our customers’ comments and feedback.”
The MiniDos product series offers six models, with ratios ranging from 1:4000 to 1:05. Maximum operating pressure on the MiniDos 12 is 140 psi/10 BAR, depending on the model, and 65 psi/4,5 BAR on the MiniDos 7 and 10. These models are constructed with a patented mixing chamber that employs a one-way gasket, prevents chemical contact with the motor piston, and reduces motor wear. Most significantly, this mixing chamber ensures a precise mixing of water and injected chemical. All models in the MiniDos series allow ratios to be adjusted while in operation and include a standard built-in bypass. The standard proprietary body material matches PVDF for chemical compatibility at no extra cost. In addition, users can change worn parts without opening the upper portion of the unit. The optional remote discharge is also available for the MiniDos product line. The new MiniDos professional series carries a limited three-year warranty—the best in the industry.
“The new labeling system allows our customers to more readily identify the correct injector for their needs,” explained Dosmatic Senior Vice President Sam Chandler. “This enhancement reflects our commitment to continuous improvement and to listening to our customers’ comments and feedback.”
The MiniDos product series offers six models, with ratios ranging from 1:4000 to 1:05. Maximum operating pressure on the MiniDos 12 is 140 psi/10 BAR, depending on the model, and 65 psi/4,5 BAR on the MiniDos 7 and 10. These models are constructed with a patented mixing chamber that employs a one-way gasket, prevents chemical contact with the motor piston, and reduces motor wear. Most significantly, this mixing chamber ensures a precise mixing of water and injected chemical. All models in the MiniDos series allow ratios to be adjusted while in operation and include a standard built-in bypass. The standard proprietary body material matches PVDF for chemical compatibility at no extra cost. In addition, users can change worn parts without opening the upper portion of the unit. The optional remote discharge is also available for the MiniDos product line. The new MiniDos professional series carries a limited three-year warranty—the best in the industry.
Tuesday, February 23, 2010
Water Bills Threaten Irrigation
Water Bills Threaten Irrigation
Came across an interersting article this morning and thought I would share it. Make the most of your irrigation with a Dosmatic injector.
Came across an interersting article this morning and thought I would share it. Make the most of your irrigation with a Dosmatic injector.
Wednesday, February 17, 2010
Dosmatic Introduces MiniDos and SuperDos Peracetic Acid (PAA) Injector Series for 2010. New injectors optimize use of peracetic acid for disinfecting and sanitizing.
Carrollton, Texas – January 22, 2010 – Dosmatic U.S.A. / International, Inc. (www.dosmatic.com), the technology leader in non-electric, fluid-driven, proportional injectors and dispensing pumps, introduced today its new MiniDos and SuperDos injectors for use with peracetic acid (PAA). This series includes the (MiniDos 12 GPM, 0.4%), (SuperDos 20 GPM, 0.3%), (SuperDos 30GPM, 0.3%) and (SuperDos 45 GPM, 0.3% models).
Increasingly, professionals are turning to peracetic acid for disinfection, sterilization and microbial control, using it to sanitize food and food service equipment, treat and purify water, prevent bio film formation and kill Legionella bacteria, among other applications. Peracetic acid kills microorganisms through oxidation and the subsequent disruption of their cell membranes. It can damage almost all types of macromolecules associated with a microorganism, leading to cell lysis and true microbial death. However, the oxidizing properties that make peracetic acid so effective also present challenges to the delivery systems used to dilute and dispense it.
In response, Dosmatic’s new MiniDos and SuperDos PAA injectors offer an appropriate and cost-effective dispensing system coupled with the largest flow ranges on the market. To protect dispensers from chemical damage, Dosmatic PAA injectors are designed with Kalrez® O-rings and seals. In addition, a Teflon® chemical induction tube has been added, which further strengthens and protects the injection system.
“PAA is one of the strongest oxidizing agents and fast becoming the dominant food and surface sanitizer in use today,” noted Tony Abrams, North American Industrial Sales Manager for Dosmatic. “Our new PAA series addresses the need for a simple, accurate and affordable solution to PAA dispensing.”
“We tested other, less-expensive seals but kept coming back to the Kalrez option because nothing else resists the aggressive, corrosive nature of PAA like it does,” Abrams added. “With effective plant sanitation critically important to a facility’s food safety net, plant managers need a practical, flexible PAA or other disinfectant dispensing system that will be operational day in and day out.”
Dosmatic's PAA injectors also take advantage of patented mixing chambers, which employ a one-way gasket, prevent chemical contact with the motor piston and reduce motor wear. Proportional injection and this pioneering mixing chamber ensure a precise mixing of water and injected chemical. What’s more, PAA models in the MiniDos and SuperDos injector series can adjust injection ratios while in operation and accommodate flow ranges up to
45 GPM (205 l/m).
Because of differences in plant operations and the PAA concentrations they use, Dosmatic consultants first determine each customer’s application, concentration and requirements before recommending any Dosmatic PAA injector. Like all Dosmatic® products, its PAA injector series is backed by a limited three-year warranty — the best in the industry. More information is available from Dosmatic Customer Service at 800-344-6767
About Dosmatic U.S.A.
The DOSMATIC® Company is the industry leader in innovation and technology for non-electric, fluid-driven, proportional injectors and pumps. Dosmatic has grown from its headquarters in Carrollton to offices in France , Belgium , Thailand , Japan , Australia , Argentina and Brazil
Thursday, February 11, 2010
SNOW, SNOW, SNOW!!
We are getting some pretty good snow in Carrollton today. Our roads are still drivable so everyone is here and ready to assist our customers. We are set to have snow all day today and freezing temperatures tomorrow. Check back here for office news. Here is a picture of our building with the snow falling.
Wednesday, January 6, 2010
Happy New Year
Dosmatic wishes everyone a happy and properous New Year! Look for some exciting news from Dosmatic coming in the next few weeks.
Monday, November 23, 2009
Dosmatic Wants YOU!!
Dosmatic is looking for an internal sales representative click the above link for more information.
Monday, November 16, 2009
Monday, November 9, 2009
Twist II Clean Demonstration Video
Twist II Clean Demonstration Video
Originally uploaded by Dosmatic
The Twist II Clean series represents a significant breakthrough in solid filtration. The patented filter technology allows for five second cleaning without disassembly. These products are specifically designed to prevent equipment and system damage from suspended solids and sediments in a water system and are required for injector warranties. At half the price of automatic black flushing systems, these filters are the most cost-effective manual back flush system available.
Friday, November 6, 2009
Winter is Coming
With many parts of the US and Canada having experienced their first frost of the year, it's time to think of protecting your very valuable injectors from Winter freeze damage. If you plan to keep your injector in your water line you must consider keeping the area where it is installed from freezing temperatures, if not remove and store as mentioned in a earlier post. Even if you drain your system you will mostly likely still have some water remaining that can cause freeze damage requiring repair or in the worst case replacement. Protect your investment by removing your injector if at all possible. If you have installed it using the suggested three valve pass system as shown in your owners manual it will be easy to remove and reinstall once warmer weather returns. If you have any questions about the best way to maintain your injector contact us and we will be happy to help!
Inyeccion Remota
Kit de Inyección Remota de Dosmatic
Éste es el video del Kit de Inyección Remota de Dosmatic, el cual está conectado al inyector en operación. Nuestro video mostrará el químico siendo succionado e inyectado en el agua/sistema fluído, haciendo un puente sin pasar por la cámara de mezcla y el motor pistón. Como nuestros clientes han descubierto, el kit de inyección remota en algunas aplicaciones extiende la vida útil del motor del inyector y permite la inyección multiple de químicos en el agua/sistema fluído.
El kit de inyección remota debe ser utilizado en ----
· En serie, cuando multiples químicos son inyectados en un sistema de agua/fluído.
· Cada inyector administra químico en el sistema fluído, al mismo tiempo que hace un puente pasando al siguiente inyector y eliminando el potencial de daño al segundo inyector en serie.
· Para incrementar la efectividad del químico principal como el fertilizante o el cloro. En serie, el segundo inyector dispensará el químico principal. El primer inyector adaptado con el kit de inyección remota puede ser utilizado para control de alkalinidad o ph con el objetivo de obtener la eficiencia máxima del químico principal. Ver diagrama de inyección remota. diagram
§ Para prevenir la acumulación de minerals en el motor. Químicos como el cloro causaran acumulación, por lo tanto es mejor inyectarlo directamente en el agua usando el kit de inyección remota.
§ Y Finalmente, para prevenir daños al motor cuando químicos agresivos son inyectados.
Recuerde: cuando inyecte mas de un químico, siempre refiera al manual de referencia del químico para su correcta aplicación.
Contacte nuestro Departamento de Atención al Cliente 1-800 344-6767 para colocar una orden de compra o para mayor información.
Visitenos en www.dosmatic.com
Jose Montenegro
VP International Sales
Dosmatic USA/International, Inc.
Éste es el video del Kit de Inyección Remota de Dosmatic, el cual está conectado al inyector en operación. Nuestro video mostrará el químico siendo succionado e inyectado en el agua/sistema fluído, haciendo un puente sin pasar por la cámara de mezcla y el motor pistón. Como nuestros clientes han descubierto, el kit de inyección remota en algunas aplicaciones extiende la vida útil del motor del inyector y permite la inyección multiple de químicos en el agua/sistema fluído.
El kit de inyección remota debe ser utilizado en ----
· En serie, cuando multiples químicos son inyectados en un sistema de agua/fluído.
· Cada inyector administra químico en el sistema fluído, al mismo tiempo que hace un puente pasando al siguiente inyector y eliminando el potencial de daño al segundo inyector en serie.
· Para incrementar la efectividad del químico principal como el fertilizante o el cloro. En serie, el segundo inyector dispensará el químico principal. El primer inyector adaptado con el kit de inyección remota puede ser utilizado para control de alkalinidad o ph con el objetivo de obtener la eficiencia máxima del químico principal. Ver diagrama de inyección remota. diagram
§ Para prevenir la acumulación de minerals en el motor. Químicos como el cloro causaran acumulación, por lo tanto es mejor inyectarlo directamente en el agua usando el kit de inyección remota.
§ Y Finalmente, para prevenir daños al motor cuando químicos agresivos son inyectados.
Recuerde: cuando inyecte mas de un químico, siempre refiera al manual de referencia del químico para su correcta aplicación.
Contacte nuestro Departamento de Atención al Cliente 1-800 344-6767 para colocar una orden de compra o para mayor información.
Visitenos en www.dosmatic.com
Jose Montenegro
VP International Sales
Dosmatic USA/International, Inc.
Storing your injector
To store your injector when not in use for a long period of time, find a 5 gallon bucket of water and put the injector in the container so it will remain wet and moist, this is to keep the seals and plastic pliable, also store this in an area where it will not freeze. When season starts just drain the injector and your ready to go. If you forget to put it in a bucket of water, you will have to fill the unit with water and let it soak for 24-48 hrs before start up.
Wednesday, October 28, 2009
MiniDos Remote Injection Demonstration
Dosmatic Remote Bypass Kit
This is the Dosmatic video of our Remote Bypass Kit, which is attached to an injector in operation. Our video will show the chemical being pulled and injected straight into the water/fluid system, while bypassing the mixing chamber and motor unit. As our customers have discovered, the remote injector kit in some applications extends the life of the injector motor and allows multiple injections within the water/fluid series.
The Remote Bypass kit attached to your injector should be used—
Remember: when mixing more than one chemical, always refer to your chemical manufacturer information guide for proper application.
Contact our customer service at 1-800 344-6767 to order or for more information.
Visit www.dosmatic.com
Jose Montenegro
VP International Sales
Dosmatic USA/International, Inc.
This is the Dosmatic video of our Remote Bypass Kit, which is attached to an injector in operation. Our video will show the chemical being pulled and injected straight into the water/fluid system, while bypassing the mixing chamber and motor unit. As our customers have discovered, the remote injector kit in some applications extends the life of the injector motor and allows multiple injections within the water/fluid series.
The Remote Bypass kit attached to your injector should be used—
- In a series, when multiple chemicals are injected into a water/fluid system. Each injector adds chemical to the fluid system, while bypassing the next injector and eliminating the potential damage to that injector.
- To increase the effectiveness of the primary chemical such as fertilizer or chlorine. In a series, the second injector will dispense the primary chemical. The first injector with the remote injector kit attached can be used to control alkalinity or ph with the goal of achieving maximum efficiency of the primary chemical. See Remote Bypass Kit diagram
- To prevent mineral buildup within the motor unit. Chemicals like chlorine will cause mineral buildup, so it is better to inject it directly into the water system using the remote injector kit.
- And finally, to prevent injector motor damage when injecting aggressive chemical.
Remember: when mixing more than one chemical, always refer to your chemical manufacturer information guide for proper application.
Contact our customer service at 1-800 344-6767 to order or for more information.
Visit www.dosmatic.com
Jose Montenegro
VP International Sales
Dosmatic USA/International, Inc.
Friday, October 23, 2009
Thursday, October 22, 2009
Troubleshooting tip #2; if the injector is clicking but not pulling solution.
First inspect the exterior, is the suction tube filter clean? If the filter is clogged, clean and replace. If the filter is clear then check the suction tube itself for cracks and replace if necessary.
If the suction tube is free of cracks or clogs then you may need to clean the suction tube fitting. To do this remove the Interlock Pin (#79 in your manual) and carefully pull out the inner cylinder. Then unscrew the suction tube fitting from the inner cylinder and clean and rinse, replace any damaged parts.
If this does not solve your problem then you would need to unscrew the external cylinder, separating if from the body of the injector. Take hold of the shaft and turn it 90 degrees in any direction to release it and pull the shaft from its housing. Remove the dosage piston and clean and inspect O-rings. To reinstall the dosage piston it is important that the thinner lips of the dosage piston be pointed up before reattaching to shaft.
Clean, dry and inspect inside the inner cylinder for scratches or cracks. If damaged, replace the inner cylinder.
You can now reassemble your lower end and the injector should now be clicking. If you need further assistance please feel free to contact our technical services department at 800-344-6767.
If the suction tube is free of cracks or clogs then you may need to clean the suction tube fitting. To do this remove the Interlock Pin (#79 in your manual) and carefully pull out the inner cylinder. Then unscrew the suction tube fitting from the inner cylinder and clean and rinse, replace any damaged parts.
If this does not solve your problem then you would need to unscrew the external cylinder, separating if from the body of the injector. Take hold of the shaft and turn it 90 degrees in any direction to release it and pull the shaft from its housing. Remove the dosage piston and clean and inspect O-rings. To reinstall the dosage piston it is important that the thinner lips of the dosage piston be pointed up before reattaching to shaft.
Clean, dry and inspect inside the inner cylinder for scratches or cracks. If damaged, replace the inner cylinder.
You can now reassemble your lower end and the injector should now be clicking. If you need further assistance please feel free to contact our technical services department at 800-344-6767.
Monday, October 5, 2009
Injector is not clicking
Dosmatic has deemed October...Troubleshooting month. Each week we will post a different scenario and provide you the information necessary to repair your injector and get you back up and running!
If your injector is not clicking the following are some simple items you can check on your injector.
1.Check that the red plugs are removed.
2.Be sure water flow is in the direction of the arrow on the body of the injector.
3.Be sure the operating pressure is not exceeding the models maximum pressure allowance.
4.Check the lower end to make sure your #17(see manual for location) O-ring is not leaking.
You can also check that your main piston assembly is not worn, if you have wear in this location we recommend you place a minimum of 104 micron inline filter prior to the injector. In addition to these items you may need to also check the cover or main body for wear. This to will need to be replaced and will be eliminated with the use of an inline filter. Finally if you do not find fault in any of these locations check your upper and lower poppets, be sure they are seated on the poppet arms and are not damaged. If you find these poppets are not seated and/or are damaged replace all poppet assemblies.
Come back next week for more troubleshooting tips.
If your injector is not clicking the following are some simple items you can check on your injector.
1.Check that the red plugs are removed.
2.Be sure water flow is in the direction of the arrow on the body of the injector.
3.Be sure the operating pressure is not exceeding the models maximum pressure allowance.
4.Check the lower end to make sure your #17(see manual for location) O-ring is not leaking.
You can also check that your main piston assembly is not worn, if you have wear in this location we recommend you place a minimum of 104 micron inline filter prior to the injector. In addition to these items you may need to also check the cover or main body for wear. This to will need to be replaced and will be eliminated with the use of an inline filter. Finally if you do not find fault in any of these locations check your upper and lower poppets, be sure they are seated on the poppet arms and are not damaged. If you find these poppets are not seated and/or are damaged replace all poppet assemblies.
Come back next week for more troubleshooting tips.
Thursday, October 1, 2009
Dosmatic welcomes guest from Europe
Dosmatic has had the privelage of hosting Cengiz Ates of Penta, Ltd. from Turkey this week for hands on training on the inner workings of our injectors.
Distributor training sessions are held at Dosmatic throughout the year. Come back to get the dates for 2010 training sessions.
Subscribe to:
Posts (Atom)